CNC
ROUTED SIGNS
  
|
CNC (Computer Numerically Controlled) Routing allows for a nice alternative to Traditional Sandblasted Signs.
|
Below is the typical staging of a V-Groove HDU Sign Foam Routed CNC Project from Start to Finish: |
|
|
Step ONE: |
Computer files are supplied by the customer or are created in-house by our design department. The files are saved in "vector" format which means that the letters and shapes are created using a series of paths and nodes that the router can interpret. |
 |
|
|
Step TWO: |
The substrate is mounted to the table and the router performs the appropriate cuts based on the file. |
 |
|
|
Step THREE: |
The Material is then removed from the router table and is sent to our Priming Department where it receives two coats of primer. |
|
Step FOUR: |
The next step is to apply the final finish to the primed sign. In most applications we used 1Shot! Sign Lettering Enamels. We also have a variety of optional finishes that can be applied to the final product such as Metallic Gold and UV Coatings. |
 |
|
|
Step FIVE: |
The sign is packaged and shipped via UPS or Insured Motor Carrier depending on the size and location. |
|
Next Page: Why Use CNC Routed Signs |
